PB Loader BC Patcher - 3, 4 and 5 Yard Models

BC-4 ASPHALT PATCHER

• 4 YD³ Capacity
• Radiant Heater
• LPG Burner
• Kevlar Chain Conveyor
• Hand Torch
• 35 Gallon LPG Tank

BH-100-15 EMULSION SPRAYER

• Heated By Truck Cooling System
• 15 Gallon Solvent Tank
• 85 Gallon Emulsion Tank
• Wand With 25’ Hose
• Auxiliary Electric Heat System
  

OPTIONS

• 36” Tool Box
• Lockable Side Tool Basket
• Hydraulic Hammer BR67 W/ Asphalt Cutter
• LED Strobe Lights
• Traffic Advisor - Whelen TA45B72; 72” LG

CONTAINER - Available in 3, 4, and 5 cubic yard capacities with double wall construction. High density insulation throughout. 45° sloping 3/16” steel floor. Double door top lids open into a “V” with inside surface acting as a funnel.
CONVEYOR - Discharged by a belt over chain, 24” wide conveyor system. High temperature, heavy duty, multiply, 18″ wide Kevlar® belt riveted onto every other crossbar by four rivets. Belting shall have WearGuard® coating and sealed ends for lacing. Reinforced and designed to withstand 800ºF and harsh cleaning solvents. Forward and reverse controls.
HEATING SYSTEM - Propane fueled casted manifold burner(s) with flume adjustment. Thermostatically controlled and 12-volt electronic igniters. 100% fuel shut off if burner is extinguished. Burner area fully enclosed and located at front of unit safely away from rear operation.
EMULSION SYSTEM - Emulsion pump or air compressor options available.
STANDARD EQUIPMENT - Truck mounted with heavy duty tie down brackets. Hand torch with 25’ hose. Shoveling apron with folding bottom. 25-gallon LPG tank.